ACRIFIX® 192 adhesive is a one-component polymerization type. It is a solution of acrylic polymer dissolved in methyl methacrylate. It is clear, slightly purple, and sticky. If the customer feels too thick, it can be diluted with CLEANER30.
It can be used for bonding acrylic cast plate and extruded plate. It is used for the surface bonding and edge bonding of various uncrosslinked acrylic plates. It can also be used for other plastics, such as CAB, PC, PS, etc. ACRIFIX® 192 bonding The agent has a caulking effect. When bonding, it needs to be polymerized by light. Ultra-light UV-A fluorescent lamps such as Philips TL ... / 05, solarium UA-A fluorescent lamps such as Philips TL ... / 09, and room temperature for light curing. At 25 degrees (the thicker the material to be bonded, the longer the light time is required), the next bonding is performed after 2-6 hours of curing, and the grinding and polishing are performed after 24 hours. It has extremely strong viscosity, and the joints are basically colorless after curing.
technical parameter
Glue name |
ACRIFIX 2R0190 |
ACRIFIX助剂020 |
ACRIFIX 1R 0192 |
ACRIFIX 117 |
ACRIFIX 030 |
Glue type |
Two-component polymer glue, chemically cured, adhesive |
BPO-based transparent slightly yellow liquid |
One-component polymer glue, chemically cured, adhesive |
One-component solvent glue, physical curing, adhesive |
MMA-based transparent colorless liquid |
Applicable sheet |
Transparent extruded and cast plates |
○ |
Transparent extruded and cast plates |
Transparent extruded and cast plates |
Dilute polymer glue to clean adherends |
application |
Butt joint, face bonding, fillet weld joint |
Composite glue catalyst |
Butt joint, face bonding, fillet weld joint |
Fast and easy bonding, butt joints, good bonding, not suitable for surface bonding |
All polymerized glue |
typical application |
Furniture, shop display, display, mechanical engineering, model building, aquarium |
ACRIFIX 2R 0190 |
Furniture, shop display, display, mechanical engineering, model building, aquarium |
Display, shop display, mechanical engineering |
○ |
Caulking effect |
Have |
○ |
Have |
No |
○ |
Bond appearance |
Colorless, no bubbles |
○ |
Colorless, no bubbles |
May form bubbles |
○ |
Weatherability |
Weatherability (annealing is recommended) |
○ |
Weatherability (annealing is recommended) |
Weather |
○ |
Bonding strength |
Very strong |
○ |
Very strong |
good |
○ |
Note |
Can be diluted and colored |
Storage temperature is not lower than 12 ℃ |
Can be diluted and colored |
Conducive to capillary effect, can be used without applying pressure to the bonding part |
Dilution ≤10% |
Solidify |
3-6% catalyst ACRIFIX CA 0020 |
○ |
Light or UV curing |
○ |
○ |
3% ACRIFIX 0020 / 200g, pot life at 20 ° C (minutes) |
20-25 |
○ |
5-30, highly dependent on the type and intensity of the light source used |
○ |
○ |
Curing time with 3% ACRIFIX 0020 (minutes) |
60-70 |
○ |
10-30 |
○ |
○ |
Time required before further processing (hours) |
>3 |
○ |
>3 |
>3 |
○ |
Viscosity mPA * S |
1600-2000 |
About 50 |
1600-2000 |
0.8 |
0,6 |
safety warning |
Irritating and flammable |
Irritating, oxidizing, toxic |
Irritating and flammable |
Harmful, highly flammable, contains dichloromethane (possible carcinogen) |
Irritating, oxidizing, toxic |
UN number |
1133 Class 3 II |
Not applicable |
1133 Class 3 II |
1133 Class 3 II |
1247 Class 3 II |
Standard specifications (other specifications may exist) |
5*1kg/ Aluminum can 1*25kg/ Compound tank |
5*60g/ Aluminum bottle 5*1kg/ Aluminum bottle |
5*1kg/ Aluminum bottle 20*100g/ Aluminum tube |
5*1kg/ Aluminum can |
5*1kg/ Aluminum can 1*25kg/ Compound tank |
XT-Extrusion Acrylic Sheet
GS-cast acrylic sheet
The solvent-based glue used is for professional use only !!!!